Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.XF.0.3-00077-IPQ60xxLZB-2 S - IMAGE_VARIANT_STRING=IPQ6018LA S - OEM_IMAGE_VERSION_STRING=crm-ubuntu64 S - Boot Interface: SPI S - Secure Boot: Off S - Boot Config @ 0x000a602c = 0x000002e1 S - JTAG ID @ 0x000a607c = 0x0013a0e1 S - OEM ID @ 0x000a6080 = 0x00000000 S - Serial Number @ 0x000a4128 = 0xae7c354d S - OEM Config Row 0 @ 0x000a4188 = 0x0000000000000000 S - OEM Config Row 1 @ 0x000a4190 = 0x0000000000000000 S - Feature Config Row 0 @ 0x000a4130 = 0x0000000008000001 S - Feature Config Row 1 @ 0x000a4138 = 0x02c3e83383000009 S - PBL Patch Ver: 1 S - I-cache: On S - D-cache: On B - 3413 - PBL, Start B - 592 - bootable_media_detect_entry, Start B - 4339 - bootable_media_detect_success, Start B - 4435 - elf_loader_entry, Start B - 4607 - auth_hash_seg_entry, Start B - 10853 - auth_hash_seg_exit, Start B - 11350 - elf_segs_hash_verify_entry, Start B - 383787 - elf_segs_hash_verify_exit, Start B - 388210 - auth_xbl_sec_hash_seg_entry, Start B - 388353 - auth_xbl_sec_hash_seg_exit, Start B - 394898 - xbl_sec_segs_hash_verify_entry, Start B - 394899 - xbl_sec_segs_hash_verify_exit, Start B - 395828 - PBL, End B - 316681 - SBL1, Start B - 456676 - GCC [RstStat:0x0, RstDbg:0x600000] WDog Stat : 0x4 B - 459116 - clock_init, Start D - 2775 - clock_init, Delta B - 467595 - boot_flash_init, Start D - 8021 - boot_flash_init, Delta B - 478880 - sbl1_ddr_set_default_params, Start D - 244 - sbl1_ddr_set_default_params, Delta B - 485499 - boot_config_data_table_init, Start D - 1921 - boot_config_data_table_init, Delta - (575 Bytes) B - 494649 - CDT Version:2,Platform ID:8,Major ID:3,Minor ID:0,Subtype:0 B - 500200 - Image Load, Start D - 6588 - OEM_MISC Image Loaded, Delta - (0 Bytes) B - 509533 - Image Load, Start D - 5063 - PMIC Image Loaded, Delta - (0 Bytes) B - 517402 - sbl1_ddr_set_params, Start B - 522373 - CPR configuration: 0x366 B - 525576 - Pre_DDR_clock_init, Start D - 213 - Pre_DDR_clock_init, Delta D - 0 - sbl1_ddr_set_params, Delta B - 562267 - Image Load, Start D - 458 - APDP Image Loaded, Delta - (0 Bytes) B - 575352 - Image Load, Start D - 427 - QTI_MISC Image Loaded, Delta - (0 Bytes) B - 577761 - Image Load, Start D - 854 - Auth Metadata D - 671 - Segments hash check D - 29006 - QSEE Dev Config Image Loaded, Delta - (36354 Bytes) B - 608719 - Image Load, Start D - 6527 - Auth Metadata D - 10675 - Segments hash check D - 819748 - QSEE Image Loaded, Delta - (1470632 Bytes) B - 1428894 - Image Load, Start D - 762 - Auth Metadata D - 1037 - Segments hash check D - 63928 - RPM Image Loaded, Delta - (102664 Bytes) B - 1494500 - Image Load, Start D - 671 - Auth Metadata D - 3202 - Segments hash check D - 315156 - APPSBL Image Loaded, Delta - (575108 Bytes) B - 1825303 - SBL1, End D - 1508927 - SBL1, Delta S - Flash Throughput, 1000 KB/s (2186005 Bytes, 1143039 us) S - Core 0 Frequency, 800 MHz S - DDR Frequency, 466 MHz U-Boot 2016.01 (Aug 19 2020 - 16:54:47 +0800) SPI: ready DRAM: smem ram ptable found: ver: 2 len: 4 1 GiB NAND: ONFI device found ID = 1590aa2c Vendor = 2c Device = aa qpic_nand: changing oobsize to 80 from 128 bytes SPI_ADDR_LEN=3 SF: Detected MX25U25635F with page size 256 Bytes, erase size 64 KiB, total 32 MiB ipq_spi: page_size: 0x100, sector_size: 0x10000, size: 0x2000000 288 MiB MMC: sdhci: Node Not found, skipping initialization In: serial@78B1000 Out: serial@78B1000 Err: serial@78B1000 machid: 8030000 Erasing SPI flash...Writing to SPI flash...done Hit any key to stop autoboot: 3  0 Net: MAC0 addr:90:3c:b3:6a:e5:43 PHY ID1: 0x4d PHY ID2: 0xd0b2 PHY ID1: 0x4d PHY ID2: 0xd101 EDMA ver 1 hw init Num rings - TxDesc:1 (0-0) TxCmpl:1 (0-0) RxDesc:1 (15-15) RxFill:1 (7-7) ipq6018_edma_alloc_rings: successfull ipq6018_edma_setup_ring_resources: successfull ipq6018_edma_configure_rings: successfull ipq6018_edma_hw_init: successfull eth0 IPQ6018# tftpboot openwrt-qualcommax-ipq60xx-edgecore_eap101-initramfs-uImage.itb ipq6018_eth_halt: done eth0 PHY0 Down Speed :10 Half duplex eth0 PHY1 Down Speed :10 Half duplex eth0 PHY2 Down Speed :10 Half duplex eth0 PHY3 Down Speed :10 Half duplex eth0 PHY4 up Speed :1000 Full duplex ipq6018_eth_init: done Using eth0 device TFTP from server 10.50.253.140; our IP address is 10.50.253.99 Filename 'openwrt-qualcommax-ipq60xx-edgecore_eap101-initramfs-uImage.itb'. Load address: 0x44000000 Loading: * Got TFTP_OACK: TFTP remote port: changes from 69 to 37795 ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################### 659.2 KiB/s done Bytes transferred = 12191944 (ba08c8 hex) ipq6018_eth_halt: done IPQ6018# bootm ## Loading kernel from FIT Image at 44000000 ... Using 'config@cp01-c1' configuration Trying 'kernel-1' kernel subimage Description: ARM64 OpenWrt Linux-6.6.29 Type: Kernel Image Compression: gzip compressed Data Start: 0x440000e8 Data Size: 12159837 Bytes = 11.6 MiB Architecture: AArch64 OS: Linux Load Address: 0x41000000 Entry Point: 0x41000000 Hash algo: crc32 Hash value: 0175878e Hash algo: sha1 Hash value: 16bdf9c115048549b965f90fe1188a15393e6280 Verifying Hash Integrity ... crc32+ sha1+ OK ## Loading fdt from FIT Image at 44000000 ... Using 'config@cp01-c1' configuration Trying 'fdt-1' fdt subimage Description: ARM64 OpenWrt edgecore_eap101 device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x44b98d88 Data Size: 30193 Bytes = 29.5 KiB Architecture: AArch64 Hash algo: crc32 Hash value: f7c54667 Hash algo: sha1 Hash value: 3c29d6fabb5211c4762497a123c3b4b85fe948a3 Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x44b98d88 Uncompressing Kernel Image ... OK Loading Device Tree to 484f5000, end 484ff5f0 ... OK fdt-fixup: unable to find compatible node mtdids not defined, no default present Using machid 0x8030000 from environment Starting kernel ... Jumping to AARCH64 kernel via monitor [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51af8014] [ 0.000000] Linux version 6.6.29 (stijn@taz) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.2.0 r25935+214-20c0dfb8e1) 13.2.0, GNU ld (GNU Binutils) 2.42) #0 SMP Fri May 3 12:53:11 2024 [ 0.000000] Machine model: EdgeCore EAP101 [ 0.000000] OF: reserved mem: 0x0000000000060000..0x0000000000065fff (24 KiB) nomap non-reusable memory@60000 [ 0.000000] OF: reserved mem: 0x000000004a100000..0x000000004a4fffff (4096 KiB) nomap non-reusable bootloader@4a100000 [ 0.000000] OF: reserved mem: 0x000000004a600000..0x000000004a9fffff (4096 KiB) nomap non-reusable memory@4a600000 [ 0.000000] OF: reserved mem: 0x000000004aa00000..0x000000004aafffff (1024 KiB) nomap non-reusable memory@4aa00000 [ 0.000000] OF: reserved mem: 0x000000004ab00000..0x000000004fffffff (87040 KiB) nomap non-reusable memory@4ab00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000004a0fffff] [ 0.000000] node 0: [mem 0x000000004a100000-0x000000004a4fffff] [ 0.000000] node 0: [mem 0x000000004a500000-0x000000004a5fffff] [ 0.000000] node 0: [mem 0x000000004a600000-0x000000004fffffff] [ 0.000000] node 0: [mem 0x0000000050000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 18 pages/cpu s35240 r8192 d30296 u73728 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: kernel page table isolation forced OFF by mitigations=off [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 swiotlb=1 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.000000] software IO TLB: mapped [mem 0x000000007eb00000-0x000000007ec00000] (1MB) [ 0.000000] Memory: 910968K/1048576K available (7872K kernel code, 880K rwdata, 2348K rodata, 8448K init, 275K bss, 137608K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 24.00MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000081] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000094] pid_max: default: 32768 minimum: 301 [ 0.005199] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.005213] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.008537] spectre-v4 mitigation disabled by command-line option [ 0.009522] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.009742] rcu: Hierarchical SRCU implementation. [ 0.009746] rcu: Max phase no-delay instances is 1000. [ 0.010468] smp: Bringing up secondary CPUs ... [ 0.011122] Detected VIPT I-cache on CPU1 [ 0.011214] CPU1: Booted secondary processor 0x0000000001 [0x51af8014] [ 0.011873] Detected VIPT I-cache on CPU2 [ 0.011940] CPU2: Booted secondary processor 0x0000000002 [0x51af8014] [ 0.012594] Detected VIPT I-cache on CPU3 [ 0.012658] CPU3: Booted secondary processor 0x0000000003 [0x51af8014] [ 0.012726] smp: Brought up 1 node, 4 CPUs [ 0.012734] SMP: Total of 4 processors activated. [ 0.012739] CPU features: detected: 32-bit EL0 Support [ 0.012743] CPU features: detected: CRC32 instructions [ 0.012812] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.012819] CPU: All CPU(s) started at EL1 [ 0.012822] alternatives: applying system-wide alternatives [ 0.019720] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.019743] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.021529] pinctrl core: initialized pinctrl subsystem [ 0.023218] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.023788] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.023826] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.023860] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.024212] thermal_sys: Registered thermal governor 'step_wise' [ 0.024266] cpuidle: using governor menu [ 0.024450] ASID allocator initialised with 65536 entries [ 0.073206] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 0.074995] Modules: 27760 pages in range for non-PLT usage [ 0.075003] Modules: 519280 pages in range for PLT usage [ 0.080107] SCSI subsystem initialized [ 0.080315] usbcore: registered new interface driver usbfs [ 0.080364] usbcore: registered new interface driver hub [ 0.080415] usbcore: registered new device driver usb [ 0.080691] qcom_scm: convention: smc arm 64 [ 0.082203] s2: Bringing 0uV into 725000-725000uV [ 0.082818] clocksource: Switched to clocksource arch_sys_counter [ 0.083340] l2: Bringing 0uV into 1800000-1800000uV [ 0.083489] qcom_rpm_smd_regulator remoteproc:glink-edge:rpm-requests:regulators: Supply for l2 (l2) resolved to itself [ 0.086671] NET: Registered PF_INET protocol family [ 0.086820] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.089371] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.089393] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.089410] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.089495] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.089761] TCP: Hash tables configured (established 8192 bind 8192) [ 0.089859] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.089897] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.090331] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.090371] PCI: CLS 0 bytes, default 64 [ 0.099595] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 0.100139] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.100147] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.110150] qcom-qmp-usb-phy 78000.ssphy: supply vdda-phy not found, using dummy regulator [ 0.110345] qcom-qmp-usb-phy 78000.ssphy: supply vdda-pll not found, using dummy regulator [ 0.112118] qcom-qusb2-phy 59000.qusb: supply vdd not found, using dummy regulator [ 0.112283] qcom-qusb2-phy 59000.qusb: supply vdda-pll not found, using dummy regulator [ 0.112339] qcom-qusb2-phy 59000.qusb: supply vdda-phy-dpdm not found, using dummy regulator [ 0.112498] qcom-qusb2-phy 59000.qusb: Registered Qcom-QUSB2 phy [ 0.112711] qcom-qusb2-phy 79000.qusb: supply vdd not found, using dummy regulator [ 0.112921] qcom-qusb2-phy 79000.qusb: supply vdda-pll not found, using dummy regulator [ 0.112963] qcom-qusb2-phy 79000.qusb: supply vdda-phy-dpdm not found, using dummy regulator [ 0.113136] qcom-qusb2-phy 79000.qusb: Registered Qcom-QUSB2 phy [ 0.114214] gpio-export soc@0:gpio_export: 2 gpio(s) exported [ 0.115452] qcom-pcie 20000000.pci: host bridge /soc@0/pci@20000000 ranges: [ 0.115508] qcom-pcie 20000000.pci: IO 0x0020200000..0x002020ffff -> 0x0000000000 [ 0.115533] qcom-pcie 20000000.pci: MEM 0x0020220000..0x002fffffff -> 0x0020220000 [ 0.122697] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.123850] msm_serial 78b0000.serial: msm_serial: detected port #1 [ 0.123903] msm_serial 78b0000.serial: uartclk = 24000000 [ 0.124293] 78b0000.serial: ttyMSM1 at MMIO 0x78b0000 (irq = 23, base_baud = 1500000) is a MSM [ 0.124741] msm_serial 78b1000.serial: msm_serial: detected port #0 [ 0.124773] msm_serial 78b1000.serial: uartclk = 1843200 [ 0.125140] 78b1000.serial: ttyMSM0 at MMIO 0x78b1000 (irq = 24, base_baud = 115200) is a MSM [ 0.125168] msm_serial: console setup on port #0 [ 0.125225] printk: console [ttyMSM0] enabled [ 0.254637] qcom-pcie 20000000.pci: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 1024G [ 0.256659] msm_serial: driver initialized [ 0.982618] loop: module loaded [ 0.983984] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xaa [ 0.984575] nand: Micron MT29F2G08ABBGAH4 [ 0.991165] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 [ 1.004814] 2 fixed-partitions partitions found on MTD device qcom_nand.0 [ 1.004862] Creating 2 MTD partitions on "qcom_nand.0": [ 1.010590] 0x000000000000-0x000003c00000 : "rootfs1" [ 1.066917] 0x000003c00000-0x000007800000 : "rootfs2" [ 1.120115] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 [ 1.121005] spi-nor spi0.0: mx25u25635f (32768 Kbytes) [ 1.135750] 19 fixed-partitions partitions found on MTD device spi0.0 [ 1.135805] Creating 19 MTD partitions on "spi0.0": [ 1.141183] 0x000000000000-0x0000000c0000 : "SBL1" [ 1.146527] 0x0000000c0000-0x0000000d0000 : "MIBIB" [ 1.151216] 0x0000000d0000-0x0000000f0000 : "BOOTCONFIG" [ 1.156116] 0x0000000f0000-0x000000110000 : "BOOTCONFIG1" [ 1.161542] 0x000000110000-0x0000002b0000 : "QSEE" [ 1.166877] 0x0000002b0000-0x000000450000 : "QSEE_1" [ 1.171526] 0x000000450000-0x000000460000 : "DEVCFG" [ 1.176816] 0x000000460000-0x000000470000 : "DEVCFG_1" [ 1.181583] 0x000000470000-0x0000004b0000 : "RPM" [ 1.186551] 0x0000004b0000-0x0000004f0000 : "RPM_1" [ 1.191290] 0x0000004f0000-0x000000500000 : "CDT" [ 1.196028] 0x000000500000-0x000000510000 : "CDT_1" [ 1.200918] 0x000000510000-0x000000520000 : "APPSBLENV" [ 1.205571] 0x000000520000-0x0000005c0000 : "APPSBL" [ 1.210750] 0x0000005c0000-0x000000660000 : "APPSBL_1" [ 1.216005] 0x000000660000-0x0000006a0000 : "ART" [ 1.220904] 0x0000006a0000-0x000000720000 : "Product_Info" [ 1.225716] 0x000000720000-0x000000730000 : "priv_data1" [ 1.231057] 0x000000730000-0x000000740000 : "priv_data2" [ 1.262855] qcom-pcie 20000000.pci: Phy link never came up [ 1.263225] qcom-pcie 20000000.pci: PCI host bridge to bus 0000:00 [ 1.267253] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.273564] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.275336] Qualcomm QCA8072: probe of 90000.mdio-1:03 failed with error -22 [ 1.278879] pci_bus 0000:00: root bus resource [mem 0x20220000-0x2fffffff] [ 1.292289] pci 0000:00:00.0: [17cb:1003] type 01 class 0x060400 [ 1.294582] Qualcomm QCA8072: probe of 90000.mdio-1:04 failed with error -22 [ 1.298964] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 1.305470] i2c_dev: i2c /dev entries driver [ 1.312204] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.325125] pci 0000:00:00.0: BAR 0: assigned [mem 0x20220000-0x20220fff] [ 1.325229] sdhci: Secure Digital Host Controller Interface driver [ 1.328624] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 1.335456] sdhci: Copyright(c) Pierre Ossman [ 1.344093] pcieport 0000:00:00.0: PME: Signaling with IRQ 30 [ 1.346613] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.351468] pcieport 0000:00:00.0: AER: enabled with IRQ 30 [ 1.359946] remoteproc remoteproc0: releasing cd00000.remoteproc [ 1.371540] NET: Registered PF_INET6 protocol family [ 1.375343] Segment Routing with IPv6 [ 1.379087] In-situ OAM (IOAM) with IPv6 [ 1.382682] NET: Registered PF_PACKET protocol family [ 1.386669] 8021q: 802.1Q VLAN Support v1.8 [ 1.421354] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 1.421678] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 [ 1.427516] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 2 [ 1.434095] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 [ 1.441734] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable [ 1.449262] cpr3_mem_acc_init: apc: not using memory accelerator regulator [ 1.458408] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 675000 uV [ 1.465351] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 787500 uV [ 1.475334] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 850000 uV [ 1.485142] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 937500 uV [ 1.494978] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 541, quot_offset[ 7]= 0 [ 1.504763] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 729, quot_offset[ 7]= 185 [ 1.515615] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]= 827, quot_offset[ 7]= 95 [ 1.526552] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]= 960, quot_offset[ 7]= 130 [ 1.537776] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop [ 1.539881] core: _opp_supported_by_regulators: OPP minuV: 1 maxuV: 1, not supported by regulator [ 1.555209] cpu cpu0: _opp_add: OPP not supported by regulators (864000000) [ 1.564221] core: _opp_supported_by_regulators: OPP minuV: 2 maxuV: 2, not supported by regulator [ 1.570797] cpu cpu0: _opp_add: OPP not supported by regulators (1056000000) [ 1.579969] core: _opp_supported_by_regulators: OPP minuV: 3 maxuV: 3, not supported by regulator [ 1.586968] cpu cpu0: _opp_add: OPP not supported by regulators (1320000000) [ 1.595879] core: _opp_supported_by_regulators: OPP minuV: 4 maxuV: 4, not supported by regulator [ 1.602855] cpu cpu0: _opp_add: OPP not supported by regulators (1440000000) [ 1.611698] core: _opp_supported_by_regulators: OPP minuV: 5 maxuV: 5, not supported by regulator [ 1.618739] cpu cpu0: _opp_add: OPP not supported by regulators (1608000000) [ 1.627643] core: _opp_supported_by_regulators: OPP minuV: 6 maxuV: 6, not supported by regulator [ 1.634627] cpu cpu0: _opp_add: OPP not supported by regulators (1800000000) [ 1.643394] cpu cpu0: OPP table can't be empty [ 1.653365] remoteproc remoteproc0: cd00000.remoteproc is avaiì[ 1.664872] Freeing unused kernel memory: 8448K [ 1.665004] Run /init as init process [ 1.949642] init: Console is alive [ 1.949833] init: - watchdog - [ 1.961243] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 1.984547] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 2.003712] ssdk_dt_parse_access_mode[1156]:ERROR:ess-switch: error reading properties for switch_access_mode [ 2.003779] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000480 [ 2.012625] Mem abort info: [ 2.023300] ESR = 0x0000000096000005 [ 2.025892] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.029716] SET = 0, FnV = 0 [ 2.035198] EA = 0, S1PTW = 0 [ 2.038044] FSC = 0x05: level 1 translation fault [ 2.041086] Data abort info: [ 2.045959] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 2.049074] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 2.054390] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 2.059490] user pgtable: 4k pages, 39-bit VAs, pgdp=000000004283a000 [ 2.064890] [0000000000000480] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 2.071216] Internal error: Oops: 0000000096000005 [#1] SMP [ 2.079716] Modules linked in: qca_ssdk(O+) gpio_button_hotplug(O) ext4 mbcache jbd2 crc32c_generic [ 2.085281] CPU: 3 PID: 601 Comm: kmodloader Tainted: G O 6.6.29 #0 [ 2.094303] Hardware name: EdgeCore EAP101 (DT) [ 2.101936] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.106454] pc : mutex_lock+0xc/0x44 [ 2.113393] lr : qca_ar8216_mii_read+0x3c/0xc4 [qca_ssdk] [ 2.117216] sp : ffffffc081bc3820 [ 2.122506] x29: ffffffc081bc3820 x28: 0000000000000000 x27: ffffffc0794fd840 [ 2.125812] x26: ffffffc081366208 x25: ffffffc0794f66ec x24: ffffffc0794f6000 [ 2.132931] x23: ffffffc081bc3940 x22: 0000000000000480 x21: 0000000000000000 [ 2.140049] x20: 0000000000000000 x19: 0000000000000000 x18: 00000000000000e8 [ 2.147167] x17: 20676e6964616572 x16: 20726f727265203a x15: ffffffc081276d20 [ 2.154285] x14: 00000000000002b8 x13: 00000000000000e8 x12: 00000000ffffffea [ 2.161403] x11: 00000000ffffefff x10: ffffffc0812ced20 x9 : ffffffc081276cc8 [ 2.168520] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8 [ 2.175638] x5 : 0000000000000fff x4 : ffffffc0794ca148 x3 : ffffffc081bc384e [ 2.182757] x2 : ffffff80028d0000 x1 : 0000000000000000 x0 : 0000000000000480 [ 2.189875] Call trace: [ 2.196984] mutex_lock+0xc/0x44 [ 2.199243] qca_mac_sw_sync_work_task+0xe4/0x404 [qca_ssdk] [ 2.202720] init_module+0x224/0x1000 [qca_ssdk] [ 2.208360] do_one_initcall+0x68/0x1f4 [ 2.212959] do_init_module+0x58/0x1d8 [ 2.216518] load_module+0x17c8/0x191c [ 2.220337] __do_sys_init_module+0x17c/0x22c [ 2.224071] __arm64_sys_init_module+0x1c/0x28 [ 2.228498] invoke_syscall.constprop.0+0x5c/0x108 [ 2.232840] do_el0_svc+0x40/0xc8 [ 2.237610] el0_svc+0x30/0xb8 [ 2.240996] el0t_64_sync_handler+0x120/0x12c [ 2.243949] el0t_64_sync+0x178/0x17c [ 2.248379] Code: d65f03c0 d2800001 d5384102 f9800011 (c85ffc03) [ 2.252027] ---[ end trace 0000000000000000 ]--- [ 2.258101] Kernel panic - not syncing: Oops: Fatal exception [ 2.262790] SMP: stopping secondary CPUs [ 2.268434] Kernel Offset: disabled [ 2.272420] CPU features: 0x0,00000000,10000000,0000400b [ 2.275636] Memory Limit: none [ 2.281187] Rebooting in 1 seconds..